Two Safety Checks First
Verify the socket has power and the leakage-protection plug has not tripped (press reset).
Six Causes
- Thermostat dial set too low.
- Overheat protection tripped — power off 15 min, then reset.
- Heating element coated with limescale — slow heating, needs descaling.
- Burned-out element — light on, no heat; replace.
- Failed thermostat — no power at all; replace with same model.
- Magnesium rod depleted, tank leaking — stop using and call service.
Descaling
In hard-water areas, descale with citric acid every 12 months.